![variateur_NL1000_b](https://www.spztunisia.com.tn/assets/images/produits/NL1000_b.jpg)
NL1000 Série - Micro Simple Variateur de fréquence
![](https://www.spztunisia.com.tn/assets/images/marques/nietz.png)
- Micro-compact, à faible coût;
- Le contrôle V / F; Intégré dans le contrôle PID, sortie plage de fréquences 0,1 ~ 400 Hz;
- Taille compacte Extreme économise de l'espace de l'installation;
- Montage sur rail DIN et montage mural installation accélérer;
- Bornes à découvert, facile pour le câblage;
- Standard supporte Modbus via RS485, sans entretien;
Caractéristiques techniques
- Input voltage,V
- 220
- 380
- Power range, кW
- 0.4 - 2.2
- 0.75 - 110
caractéristiques techniques Variateur de fréquence Series NL1000
Items | specification | |
---|---|---|
Control Specifications |
Output Frequency Range |
0.10Hz~400.00Hz |
Frequency Setting Resolution |
Digital input: 0.1Hz, analog input: 0.1% of maxium output frequency |
|
Output Frequency Accuracy |
0.1Hz |
|
V/F Control |
Setting V/F curve to satisfy various load requirements. |
|
Torque Control |
Auto increase: auto raise torque by loading condition; Manual increase; enable to set 0.0~20.0% of raising torque. |
|
Multifunctional Input Terminal |
Four multi-function input terminals, realizing functions including fifteen section speed control, program running, four-section acceleration/deceleration speed switch, UP/DOWN function and emergency stop and other functions. |
|
Multifunctional Output Terminal |
1 multi-function output terminals for diaplaying of running, zerospeed, counter, external abnormity, program operation and other information and warnings. |
|
Accleration/ deceleration Time Setting |
0~999.9s acceleration/deceleration time can be set individually. |
|
Other functions |
PID Control |
Built-in PID control |
RS485 |
Standard RS485 communication function (MODBUS) |
|
equency Setting |
Analog input: 0 to 10V, 4 to 20mA can be selected; Digital input: Input using the setting dial of the operation panel or RS485 or UP/DOWN. Note: AV1 terminals can be used to select an analog voltage input (0-10V) and an analog current input (4-20mA) through the switch J2. |
|
Multi-speed |
Four multifunction input terminals, 15 section speed can be set. |
|
Automatic voltage regulation |
Automatic voltage regulation function can be selected. |
|
Counter |
Built-in 2 group of counters |
|
Protection/Warning Function |
Overload |
150%, 60 second (Constant torque) |
Over Voltage |
Over Voltage Protectation can be set. |
|
Under Voltage |
Under Voltage protection can be set. |
|
Other Protections |
Output shortcircuit, over current, an parameter lock and so on. |
|
Environment |
Ambient Temperature |
"-10℃ to 40℃ " (non-freezng) |
Ambient Humidity |
Max. 95% (non-condensing) |
|
Altitude |
Lower than 1000m |
|
Vibration |
Max. 0.5G |
|
Structure |
Cooling Mode |
Forced air cooling |
Protective Structure |
IP 20 |
|
Installation |
Wall-mounted or standard 35MM rail mounting |
![graph1](https://www.spztunisia.com.tn/assets/images/NL1000_graph1.png)
![graph2](https://www.spztunisia.com.tn/assets/images/NL1000_graph2.png)